C-Mount Machine Vision Lenses

Name: C-Mount Machine Vision Lenses
Brand: PhotonEdge
SKU: PE-LENS-CMOUNT-011
Availability: LimitedAvailability

Key Specifications

Critical Parameters for Lenses

When specifying this product, these parameters most directly impact performance and cost:

Wavelength Focal Length Diameter Surface Quality Coating

Mount Type	C-Mount (1" diameter, 32 TPI, 17.526mm flange)
Focal Lengths	4mm, 6mm, 8mm, 12mm, 16mm, 25mm, 50mm
Sensor Format	1/3", 1/2", 2/3", 1"
Resolution	Up to 5MP+
Distortion	< 0.1% (low distortion designs)
Aperture	Manual iris, F1.4-F16 typical
Working Distance	10mm to infinity
Coatings	Multi-layer broadband AR

Parameter Reference Guide

Typical Standard capability — available as shown
Available Alternative options exist — request quotation
Custom Per your drawing — quote after review
Subject to Review Depends on project specifics

What Is a C-Mount Machine Vision Lenses?

C-mount machine vision lenses are complete optical assemblies designed for industrial imaging applications. They feature a standard C-mount thread (1"-32 TPI) for compatibility with C-mount and CS-mount cameras.

These lenses are optimized for high resolution, low distortion, and telecentric or near-telecentric performance, making them ideal for precision measurement, inspection, and automated quality control in manufacturing environments.

When Should You Use This Product?

✔ Good Choice When

✓ Industrial inspection and quality control systems
✓ Barcode and OCR reading applications
✓ Precision measurement with low distortion
✓ Automated manufacturing line vision systems

⚠ Consider an Alternative When

✗ Custom optical design needed Plano-Convex + custom assembly

✗ Microscope-level magnification Microscope Objective

✗ Large-area coverage Larger format lens

✗ UV imaging UV optics assembly

Available Optical Materials

Select the optimal substrate material based on your wavelength, environment, and budget requirements.

Material	Transmission	Key Advantage	Considerations
Multi-Element Glass	VIS (400-700nm)	Optimized for visible imaging with achromatic correction	Fixed assembly, not user-serviceable

Not sure which material to choose?

Ask AI Optical Engineer

Optical Coating Options

Multi-Layer BBAR

Broadband AR across visible spectrum. R < 0.5% per surface.

Typical use: All machine vision applications

Enhanced Contrast

Special coatings to reduce ghosting and flare.

Typical use: High-contrast inspection applications

How to Specify Your Coating

To select the right coating, please provide: (1) Operating wavelength, (2) Angle of incidence, (3) Required transmission or reflectivity, (4) Laser power density (if applicable), (5) Operating environment.

Engineering Considerations

Key factors to evaluate when specifying this optical component for your system.

Sensor Matching

Match lens image circle to sensor size. 2/3" lens on 1/3" sensor works; reverse causes vignetting.

Working Distance

Determine required WD and depth of field. Shorter focal length = wider FOV at same WD.

Distortion

For metrology applications, specify low distortion (< 0.1%) or apply software correction.

Resolution

Match lens resolution (line pairs/mm) to pixel pitch of your camera sensor.

C-Mount vs CS-Mount

C-mount = 17.526mm flange distance. CS-mount = 12.526mm. Use C-to-CS adapter ring if needed.

Applications

Imaging Systems

High-resolution image formation for industrial and scientific imaging.

Machine Vision

Inspection, measurement, and quality control in manufacturing.

Medical Devices

Optics for microscopy, endoscopy, and diagnostic imaging.

Research & Education

Laboratory setups and experimental optics.

Manufacturing & Customization

Manufacturing Capability Levels

Capability	Standard	Precision	Project-Specific
Surface Quality	40-20	20-10	10-5 or tighter
Flatness	λ/4	λ/10	λ/20+
Dimensional Tol.	±0.05mm	±0.01mm	±0.005mm
Centration	≤3 arc-min	≤1 arc-min	≤30 arc-sec

Actual capability depends on material, geometry and coating. Final specifications confirmed through engineering review.

PhotonEdge supports optical component sourcing, engineering review, and qualified manufacturing through our optical manufacturing network. We coordinate production, coating, and inspection to deliver components that meet your specifications.

🔬

Prototype

⚙️

Low Volume

🏭

Volume Production

📋

Custom Specification

Quality Assurance

Dimensional Inspection

Diameter, thickness, focal length verified per specification

Surface Quality

Scratch-dig inspection under calibrated illumination

Coating Verification

Spectrophotometric measurement of transmission/reflectance

Inspection documentation available according to project requirements. Certificates of Conformance, material test reports, and coating curves can be provided.

Available Documentation

Document	Purpose
Inspection Report	Confirms optical and mechanical specifications
Material Certificate	Confirms substrate material and grade
Coating Report	Confirms coating performance and wavelength range
Certificate of Conformity	Confirms conformity to agreed requirements
Dimensional Report	Confirms mechanical dimensions and tolerances

Documentation provided according to agreed project requirements.

You May Also Need

Related Knowledge

Engineering Documentation

The following documentation is available upon request for qualified engineering projects:

📐

Dimensional Drawing

CAD & dimensional specs per your requirements

📊

Material Data Sheet

Material properties, transmission curves & certificates

📈

Coating Performance Curve

Spectrophotometric measurement data

🔍

Inspection Report

Surface quality, flatness, centration & dimensional data

✅

Certificate of Conformance

CoC with full traceability per project requirements

📋

Custom Specification Sheet

Application-specific specification documentation

Documentation availability depends on project scope and order quantity. Request details during RFQ.

Ordering Information

Price Range

See Quote

Standard Lead Time

Ships within 1 week after payment

Custom Lead Time

Subject to engineering evaluation

MOQ

1 Piece

Samples

Available

Specification Parameters

Typical Specifications shown on this page are standard capabilities. Available Options include alternative materials and coatings. Custom Specifications are available per your drawing. Requirements beyond standard capability are marked Subject to Engineering Review.

Get a Quote Full Ordering Guide

Frequently Asked Questions

What materials are available for this lens type?

We offer multiple substrate materials including N-BK7, UV Fused Silica, CaF₂, and Sapphire depending on your wavelength and environmental requirements.

Can I order custom specifications?

Yes. PhotonEdge offers custom diameters, focal lengths, coatings, and surface qualities. Custom optics require engineering evaluation. Lead time is confirmed with your quotation.

What surface quality should I specify?

40-20 is suitable for most laser and imaging applications. 20-10 is recommended for precision systems where scattering must be minimized.

What coating do I need?

The coating depends on your operating wavelength. For visible applications, AR 350-650nm is standard. For NIR lasers, choose the coating matching your wavelength. Uncoated is suitable for non-critical applications.

Do you provide inspection reports?

Yes. Dimensional reports, surface quality verification, and coating performance data are available according to project requirements.

How do I request a quote?

Click the 'Request a Quote' button and provide your diameter, focal length, wavelength, coating, surface quality, and quantity.

What is C-mount?

C-mount is a standard lens mount with 1"-32 TPI thread and 17.526mm flange distance, widely used in machine vision cameras.

What is the difference between C-mount and CS-mount?

CS-mount has 12.526mm flange distance. A C-mount lens needs a 5mm adapter ring for CS-mount cameras.

Not Sure Which Specification You Need?

Describe your optical system and our AI Optical Engineer will help identify the right specifications, materials, and coatings for your application.

Ask AI Optical Engineer

Before Requesting a Quote

To help us provide an accurate quotation, please prepare the following information. Not all fields are required — send what you have, and our engineering team can help identify missing parameters.

✓ Material

BK7, fused silica, CaF₂, etc.

✓ Dimensions

Diameter, thickness, focal length

✓ Wavelength

Operating wavelength or range

✓ Coating

AR, HR, metallic, or uncoated

✓ Surface Quality

Scratch-dig, roughness

✓ Quantity

Prototype, low volume, or production

✓ Application

Laser, imaging, spectroscopy, etc.

✓ Operating Environment

Temperature, vacuum, cleanroom

Not sure about some specifications? Send what you have — our engineering team will help identify the missing parameters and recommend appropriate values for your application.