Optical Lenses

Fused Silica Plano-Convex Lenses

UV-grade fused silica plano-convex lenses optimized for laser beam focusing and collimation across the UV, visible and near-IR spectrum. Near-zero thermal expansion and high laser damage threshold make them ideal for demanding optical systems.

Material

UV Fused Silica

Availability

Standard / Custom

Request Engineering Quote Ask AI Optical Engineer
Fused Silica Plano-Convex Lenses

Key Specifications

MaterialUV Fused Silica (SiO2)
Transmission Range185 - 2,500 nm
Diameter Range3mm - 100mm
Focal Length Range5mm - 2,000mm
Surface Quality20-10 / 40-20 (MIL-PRF-13830B)
Surface Flatnesslambda/4 @ 632.8nm
Centration< 3 arc min
CoatingAR @ 193/266/355/532/1064nm / BBAR / Custom
LIDT> 10 J/cm2 @ 1064nm, 10ns
CTE0.55 x 10^-6/K (near-zero)

Available specifications vary by material and configuration. Contact engineering for exact capabilities.

What Is Fused Silica Plano-Convex Lenses?

Fused silica plano-convex lenses are positive lenses made from UV-grade fused silica. Compared to BK7, fused silica offers broader UV transmission, lower coefficient of thermal expansion, and higher laser damage threshold.

When Should You Use This Product?

Use fused silica plano-convex lenses for UV applications, high-power laser systems, and environments with temperature fluctuations. Excellent for excimer lasers, UV lithography, and high-energy laser focusing.

Available Optical Materials

MaterialAvailabilitySpec Sheet
UV Fused Silica Standard / Custom See material page

All materials are available in standard and custom thicknesses. Browse all 30+ optical materials →

Optical Coating Options

Anti-Reflection (AR)

Single-layer or multi-layer AR coatings for specific wavelength bands. Reduce reflection to below 0.5% per surface.

High-Reflection (HR)

Dielectric HR coatings for laser mirrors and cavity optics. Reflectivity >99.5% at design wavelength.

Broadband AR

BBAR coatings for wide spectral range applications. Low reflection across 400-700nm or other bands.

Laser Line Coatings

Optimized for specific laser wavelengths: 266nm, 355nm, 532nm, 1064nm, 10.6µm, etc.

Custom Coating

Custom coating designs for unique wavelength ranges, angles of incidence, and polarization requirements.

Engineering Considerations

Wavelength Selection

Material and coating selection must be matched to your operating wavelength band. We can help optimize for single-wavelength or broadband use.

Tolerance Budget

Surface quality, flatness, and centration tolerances directly impact cost. Our engineers can help balance performance requirements with manufacturability.

Thermal Considerations

High-power or wide temperature range applications require careful material selection to minimize thermal lensing and wavefront distortion.

Environmental Durability

For harsh environments, consider material chemical resistance, coating durability, and packaging options. We can provide MIL-spec testing on request.

Applications

Laser Systems

Beam focusing, collimation, and resonator optics for CW and pulsed laser systems.

Semiconductor Equipment

UV-grade optics with ultra-flat surfaces for wafer inspection and metrology.

Research & Laboratory

Custom and catalog optics for university and R&D laboratory setups.

Manufacturing & Customization

30+
Optical Materials
Custom
Sizes & Shapes
ISO 9001
Certified Facility
4-6 wks
Custom Lead Time

Quality Assurance

Every component undergoes comprehensive inspection before shipment. Our quality control process includes:

  • Dimensional verification with calibrated metrology equipment
  • Surface quality inspection per MIL-PRF-13830B standards
  • Coating performance verification with spectrophotometry
  • Centration and wedge angle measurement
  • Cleanroom packaging for critical applications

Learn more about our quality processes →

You May Also Need

Browse All Products

Explore our complete catalog of optical components

AI Optical Engineer

Get instant material and coating recommendations

Evidence Center

Inspection reports, coating curves, test data

Related Knowledge

Application Note

Surface Quality: Scratch-Dig Explained

Understanding MIL-PRF-13830B surface quality specifications and what they mean for your application.

 Knowledge Center

Optical Materials Guide

Compare 30+ optical materials by wavelength range, properties, and typical applications.

Engineering Documentation

PDF

Fused Silica Plano-Convex Lenses - Datasheet

Standard specifications, available options, and ordering information

Request →
DWG

Fused Silica Plano-Convex Lenses - Drawing Template

Standard drawing with full dimension callouts and tolerance information

Request →
3D

3D CAD Model (STEP)

3D solid model for integration into your optical design software

Request →

Documentation available upon request. Custom specifications require engineering review.

Frequently Asked Questions

What are fused silica plano-convex lenses used for?

Fused Silica Plano-Convex Lenses are used in optical systems where precise control of light is required. Common applications include laser systems, imaging, spectroscopy, and scientific instrumentation.

What is the wavelength range?

The usable wavelength range depends on the selected material and coating. Please refer to the material specifications above or contact our engineering team for guidance.

Can I order custom sizes or specifications?

Yes. PhotonEdge offers custom diameters, focal lengths, and coating specifications outside our standard catalog. Custom specifications typically require 4-6 weeks lead time.

What coatings are available?

We offer a range of standard and custom coatings including AR, HR, broadband, and laser-line options. Coating selection depends on your wavelength range and application requirements.

What quality standards do you follow?

Our manufacturing facility is ISO 9001:2015 certified. All components undergo rigorous inspection including dimensional verification, surface quality assessment, and coating performance testing.

Do you provide inspection reports?

Yes. Inspection documentation including dimensional reports, surface quality verification, and coating performance data can be provided according to project requirements.

What is the typical lead time?

Standard catalog components typically ship within 2-4 weeks. Custom specifications require 4-8 weeks depending on complexity. Contact us for expedite options.

How do I request a quote?

Click the 'Request Engineering Quote' button above. Please provide your required specifications, wavelength, coating, surface quality, and quantity for an accurate quotation.

Not sure which option is right for your project?

Describe your system requirements and our AI Optical Engineer will recommend materials, coatings, and specifications instantly.

Try AI Optical Engineer →