PE-WP-ACH-046 · Standard + Custom

Achromatic Waveplates

Broadband waveplates maintaining retardance across wide wavelength ranges

Material
Quartz / Calcite / MgF₂
Wavelength
Broadband (design range)
Type
λ/4 or λ/2 (achromatic)
Category
Optical Waveplates & Polarizers
Request a Quote Ask AI Optical Engineer
Achromatic Waveplates

Key Specifications

Critical Parameters for Waveplates

When specifying this product, these parameters most directly impact performance and cost:

Wavelength Retardance Accuracy Clear Aperture Damage Threshold
TypeAchromatic λ/4 or λ/2
MaterialCompound (Quartz + MgF₂)
Retardanceλ/4 or λ/2 ± 3%
Wavelength RangeBroadband (e.g., 400-800nm)
Aperture5-20 mm
Temp Range0-40°C typical
Clear Aperture> 90%
AR CoatingsOptional

Parameter Reference Guide

Typical Standard capability — available as shown
Available Alternative options exist — request quotation
Custom Per your drawing — quote after review
Subject to Review Depends on project specifics

What Is a Achromatic Waveplates?

Achromatic Waveplates provide precise polarization control for optical systems. Broadband waveplates maintaining retardance across wide wavelength ranges.

PhotonEdge offers standard and custom waveplates and polarizers in quartz, calcite, MgF₂, and α-BBO materials for visible, UV, and NIR applications.

When Should You Use This Product?

✔ Good Choice When

  • ✓ Multi-wavelength polarization control
  • ✓ Broadband spectroscopy polarization
  • ✓ Tunable laser systems
  • ✓ Fluorescence and multi-wavelength setups

⚠ Consider an Alternative When

✗ Single wavelength, budget Zero-Order Waveplate
✗ Economy general use Multiple-Order Waveplate
✗ High extinction Glan-Type Polarizer
✗ Visible polarizer Visible Linear Polarizer

Available Optical Materials

Select the optimal substrate material based on your wavelength, environment, and budget requirements.

MaterialTransmissionKey AdvantageConsiderations
QuartzVIS / NIRStandard waveplate material, good durabilityWavelength-sensitive retardance
MgF₂UV / VISUV-compatible waveplate materialLower damage threshold than quartz
CalciteVIS / NIRHigh birefringence for polarizersLimited aperture size

Not sure which material to choose?

Ask AI Optical Engineer

Optical Coating Options

Uncoated (AR optional)

Uncoated polarizing elements. Optional AR available.

Typical use: General polarization control

BBAR Visible

Broadband AR for 400-700nm. R < 0.5% per surface.

Typical use: Visible polarization applications

AR Custom Wavelength

Custom AR for specific wavelength bands.

Typical use: Laser or specialized applications

How to Specify Your Coating

To select the right coating, please provide: (1) Operating wavelength, (2) Angle of incidence, (3) Required transmission or reflectivity, (4) Laser power density (if applicable), (5) Operating environment.

Engineering Considerations

Key factors to evaluate when specifying this optical component for your system.

Retardance Accuracy

Zero-order: ±λ/200; Multiple-order: ±λ/50. Specify based on system requirements.

Wavelength Sensitivity

Multiple-order waveplates are highly wavelength-sensitive. Zero-order and achromatic designs offer better broadband performance.

Temperature Sensitivity

Retardance shifts with temperature. Zero-order and achromatic designs are more stable.

Extinction Ratio

For polarizers, higher extinction ratio = better polarization purity. Glan-Laser: > 10⁵.

Applications

Laser Systems

Polarization control and management in laser cavities and beam paths.

Spectroscopy

Polarization-sensitive measurements and ellipsometry.

Telecommunications

Polarization-maintaining components for fiber optic systems.

Research & Metrology

Precision polarization experiments and optical metrology.

Manufacturing & Customization

Manufacturing Capability Levels

Capability Standard Precision Project-Specific
Surface Quality 40-20 20-10 10-5 or tighter
Flatness λ/4 λ/10 λ/20+
Dimensional Tol. ±0.05mm ±0.01mm ±0.005mm
Centration ≤3 arc-min ≤1 arc-min ≤30 arc-sec

Actual capability depends on material, geometry and coating. Final specifications confirmed through engineering review.

PhotonEdge supports optical component sourcing, engineering review, and qualified manufacturing through our optical manufacturing network. We coordinate production, coating, and inspection to deliver components that meet your specifications.

🔬
Prototype
⚙️
Low Volume
🏭
Volume Production
📋
Custom Specification

Quality Assurance

Dimensional Inspection

Diameter, thickness, focal length verified per specification

Surface Quality

Scratch-dig inspection under calibrated illumination

Coating Verification

Spectrophotometric measurement of transmission/reflectance

Inspection documentation available according to project requirements. Certificates of Conformance, material test reports, and coating curves can be provided.

Available Documentation

Document Purpose
Inspection Report Confirms optical and mechanical specifications
Material Certificate Confirms substrate material and grade
Coating Report Confirms coating performance and wavelength range
Certificate of Conformity Confirms conformity to agreed requirements
Dimensional Report Confirms mechanical dimensions and tolerances

Documentation provided according to agreed project requirements.

You May Also Need

Multiple-Order Waveplates

Economical waveplates

Zero-Order Waveplates

Precision waveplates

Achromatic Waveplates

Broadband waveplates

Visible Linear Polarizers

General polarizers

Related Knowledge

Polarization Control in Optical Systems

Read article

Laser Optics: Component Selection Guide

Read article

Understanding Optical Coatings

Read article

Spectroscopy Optics Selection Guide

Read article

Engineering Documentation

The following documentation is available upon request for qualified engineering projects:

📐
Dimensional Drawing

CAD & dimensional specs per your requirements

📊
Material Data Sheet

Material properties, transmission curves & certificates

📈
Coating Performance Curve

Spectrophotometric measurement data

🔍
Inspection Report

Surface quality, flatness, centration & dimensional data

✅
Certificate of Conformance

CoC with full traceability per project requirements

📋
Custom Specification Sheet

Application-specific specification documentation

Documentation availability depends on project scope and order quantity. Request details during RFQ.

Ordering Information

Price Range
See Quote
Standard Lead Time
Ships within 1 week after payment
Custom Lead Time
Subject to engineering evaluation
MOQ
1 Piece
Samples
Available

Contact us for exact pricing based on your specifications.

Specification Parameters

Typical Specifications shown on this page are standard capabilities. Available Options include alternative materials and coatings. Custom Specifications are available per your drawing. Requirements beyond standard capability are marked Subject to Engineering Review.

Get a Quote Full Ordering Guide

Frequently Asked Questions

What is the difference between zero-order and multiple-order waveplates?

Zero-order waveplates are thinner and have less wavelength/temperature sensitivity. Multiple-order waveplates are less expensive but more sensitive to wavelength and temperature changes.

What retardance accuracy do you offer?

Standard tolerance is ±λ/50 for multiple-order and ±λ/200 for zero-order waveplates. Tighter tolerances available on request.

Can waveplates be used with high-power lasers?

Yes. Specify your laser power density for proper material and coating selection. Zero-order crystalline waveplates handle high power well.

What materials are used?

Standard materials include quartz (for VIS-NIR), MgF₂ (for UV), and ZnSe (for IR). Achromatic waveplates use compound designs.

How do I specify a waveplate?

Provide: retardance (λ/4 or λ/2), design wavelength, clear aperture, and power requirements.

What is the operating temperature range?

Crystalline waveplates typically operate from -40°C to +80°C. Achromatic waveplates may have more limited ranges.

Not Sure Which Specification You Need?

Describe your optical system and our AI Optical Engineer will help identify the right specifications, materials, and coatings for your application.

Ask AI Optical Engineer

Before Requesting a Quote

To help us provide an accurate quotation, please prepare the following information. Not all fields are required — send what you have, and our engineering team can help identify missing parameters.

✓ Material
BK7, fused silica, CaF₂, etc.
✓ Dimensions
Diameter, thickness, focal length
✓ Wavelength
Operating wavelength or range
✓ Coating
AR, HR, metallic, or uncoated
✓ Surface Quality
Scratch-dig, roughness
✓ Quantity
Prototype, low volume, or production
✓ Application
Laser, imaging, spectroscopy, etc.
✓ Operating Environment
Temperature, vacuum, cleanroom

Not sure about some specifications? Send what you have — our engineering team will help identify the missing parameters and recommend appropriate values for your application.

Request a Quote

Provide your requirements and our engineering team will respond within 1 business day with a detailed quotation.

TypeMaterialRetardanceWavelength RangeApertureTemp RangeClear ApertureAR Coatings
Request a Quote

Have a Custom Requirement?

Upload your drawing or specifications. Our engineering team will review and respond within 1 business day.

Upload Your Drawing Request a Quote